roger beep mod on galaxy 94hp
does anyone have a mod on the roger beep on the Galaxy 94hp?
If you want a simple switch on the front of the radio using the NB/ANL CB PA switch follow these directions.
Find J6, 3 wires. Green (8v), Yellow (ANL), Orange (NB).
Cut the Orange Wire (NB) at the plug.
Solder it into the RB hole for J10.
If you want more more static, levae as is.
If you want less static, cut the Yellow Wire (ANL) at the plug and tape off the wire.
Using the NB/ANL setting will turn ON the Roger Beep.
Using the CB setting will turn it OFF.
thats all i could find!
Open your radio up and tell us what board it is using.. "EPTxxxxxxx" it will be printed at the front of it
Originally Posted by lightnin26
If you have the EPT360014 you can just go here:
Everyone who complains about DEI's not making the same watts or not taking volts etc is an asshole.
I approve my post.
Post Thanks / Like - 1 Thanks, 0 Dislikes
thanks guys........... I forgot all about the galaxy mod website......gonna try to modify the existing board to make a mule fart in the radio instead of putting the new board!!!!!!!!!!!
the 94hp already has a on/off switch for the beep.galaxy website should have the mod .
lol i wasnt sure if it didnt or did have the rb.......i wouldnt know atleast i tried
93T doesnʻt have a switch.
ITʻs A 10K WORLD!!
This post was not endorsed by Mauldroppers.com or the N.S.A
Originally Posted by -=PEAKABOO=-
Originally Posted by A.M Hater
i bring sheep what you do with them is between you and your god